The Bosch GBM9-16 Mixer handles a wide variety of materials, from paint to plaster and more. It has variable speed control, and it has both forward and reverse operation at 0-700 no-load RPM. The all-ball bearing motor and precision-cut steel gears deliver plenty of power for high-torque mixing jobs. Higher speed is best for materials with low viscosity such as paint or sealing compounds. Lower speed, higher torque mixing works for mortar or epoxy resin. It features a 360° rotatable D handle, for maximum comfort. It diminishes vibration while allowing the user to adjust to the desired position. The heavy-duty 5/8 In. keyed chuck allows the tool to support a large variety of accessories. It features a tough, lightweight magnesium front housing for durability. It has a two-finger trigger design for easier mixing.
9.0 Amps
5/8" Keyed Chuck, No Load RPM 0-700, Max.Hole Diameter in Steel-Twist Drill Bit 1/2"
Weight 6.6 lbs., Height 10", Length 14", Width 2.5"
Rent from $15.00
This wall and floor scanner features radar technology, which is accurate and reliable, indicating the correct material. The Bosch D-TECT200C Wall/Floor Scanner delivers advanced precision. Not just a stud finder, it detects live and non-live cables, rebar, metal, plastic pipes and wooden studs, with depth indication of the object. It has leakage detection, which allows fast discovery of a leak. The scanner’s screenshot feature supports quick-and-easy documentation. It can be saved and transferred to a computer for further analysis. The USB-C™ and SD card slot enables quick data transfer. The spot view delivers fast results and measurements in small places to scan (such as corners), and the scanner provides about a 7-1/2 In. measuring depth to detect even deep objects. The 3.5 In. color display provides clear readability, and the user interface is intuitive, providing clear illustration of detected objects. It runs on Bosch 12V Max Li-ion batteries for outstanding runtime.
Max Detection Depth; Copper Wiring 3", Steel/Rebar 8", Copper Pipe 8"
Rent from $50.00
A powerful 14 Amp motor with Constant Response circuitry. This provides a constant hard-hitting 12.4 Ft./Lbs. Of impact energy. Variable speed control allows users to adjust the impact force to the material being removed. The SDS-max® tool holder provides you with the largest assortment of steel accessories for every job. The padded rear handle absorbs shock for operator comfort. Ideal tool for tile, brick, stucco removal, surface preparation and concrete demolition.
14.0 Amps, Impact Energy/EPTA 12.4 Ft/lbs. EPTA
SDS-Max Drive System
Weight 22.5 lbs., Length 22.5", Height 12", Width 5"
Rent from $45.00
The Bosch 11255VSR SDS-plus® Bulldog™ Xtreme 1 In. Rotary Hammer is a versatile, handy tool. From anchoring to large material breaking, it gets the job done right the first time. Engineered in the tradition of legendary Bulldogs, this powerful hammer delivers 2.0 Ft.-Lbs. of impact energy and 0-5,800 no-load BPM, but it weighs just 6.7 Lbs. The multifunction mode selector allows users to easily select among three modes of operation: rotary hammer, rotation only and hammer only. To optimize the chiseling angle, it has Vario-Lock positioning that rotates and locks the chisel in one of 36 different positions. The hammer is designed with an ergonomic D-handle for comfort. It features a variable-speed reversing trigger for accurate bit starting, and a Bosch-exclusive rotating brush plate, for equal power in forward and reverse.
8.0 Amps, SDS-Plus Drive System, Optimal Concrete Capacity 3/16" - 5/8"
Max. Bit/Hole Diameter 1", Max. Hole Diameter in Concrete-Thin Wall Core Bit 2-5/8"
Weight 6.7 lbs., Height 6", Length 17.25", Width 3.5"
Rent from $24.00
The Bosch RH1255VC SDS-max® 2 In. combination hammer has Turbo Power, which gives the tool a torque and speed boost in hammer mode. It also provides 14.1 Ft.-Lbs. of impact energy for top-rated power. At under 27 Lbs., it has outstanding performance-to-weight ratio in a 2 In. hammer. It features Vibration Control for additional operator control while mitigating vibration in the hammer mechanism and in the handle. This hammer provides Constant Response circuitry for smooth starts, precise hole placement and constant speed under load. Vario-Lock positioning permits rotating and locking the chisel with precision. And the SDS-max® bit system provides toolless bit changes.
15.0 Amps, Impact Energy/EPTA 14.1 Ft/lbs. EPTA
SDS-Max Drive System, Max. Bit Diameter 2", Max. Hole Dia. in Concrete-Core Bit 6"
Weight 26.2 lbs., Length 23.5", Height 11.3", Width 5"
Rent from $45.00
The Bosch RH540M SDS-max® 1-9/16 In. Combination Hammer is a rotary hammer and hammer-only tool designed for concrete contractors and professional remodelers who need a powerful and versatile tool. It delivers 6.1 Ft.-Lbs. of impact energy while weighing in at only 15.2 Lbs. The motor is rated at 170 to 340 RPM in rotary mode and 1,200 to 2,750 BPM in hammer mode, which will easily reduce concrete to dust. Its SDS-max® bit system allows tool-free and one-handed bit changes. The Vario-Lock mechanism lets users angle the chisel into 12 different positions to optimize the working angle. The hammer has a Dual Mode Selector Knob and service minder brushes, which clearly indicate when preventive maintenance is required.
12.0 Amps
SDS-Max Drive System, Max. Bit Diameter 1-9/16", Max. Hole Dia. in Concrete-Core Bit 4" and 2-1/2" in Concrete-Thru Hole Bit
Weight 15.2 lbs., Height 10.5", Length 19", Width 4"
Rent from $30.00